Inconel 600 Spiral Wound Gaskets
Item No.:ZD-G1202/600
Description:Inconel 600 is a nickel base alloy with resistance to a variety of corrosive conditions. The Alloy 600 is used in a variety of corrosion resisting applications. The high nickel content of Alloy 600 provides a level of resistance to reducing environments, while the chromium content of the material provides resistance to weaker oxidizing environments. The high nickel content of the material provides exceptional resistance to chloride stress corrosion cracking.
Spiral Wound
Gasket Nickel 600 Applications:
Food
and chemical processing
equipments;
Paper
mill and alkaline digesters;
Heat Exchangers.
Corrosion
Resistance:
The
high nickel content of alloy 600
provide good resistance to
moderate levels of reducing
conditions. The nickel content
of the alloy renders the alloy
extremely resistant to chloride
stress corrosion cracking. Alloy
600 is one alloy used in
solutions of magnesium chloride.
In
strong oxidizing solutions like
hot, concentrated nitric acid,
Alloy 600 has poor resistance.
Alloy
600 is relatively unattacked by
the majority of neutral and
alkaline salt solutions. It is
used in some caustic
environments.
Alloy
600 resists steam and mixtures
of steam, air, and carbon
dioxide.
The nickel content of the alloy
renders it subject to attack at
elevated temperatures in
sulfur-containing atmospheres.
Chemical Analysis:
|
C |
Mn |
S |
Si |
Cr |
Ni+Co |
Fe |
Cu |
|
0.05 |
0.25 |
0.002 |
0.20 |
15.5 |
Balance |
8.0 |
0.1 |
Mechanical
Properties:
(Room temperature mechanical
properties)
|
0.2% Offset Yield Strength MPa |
Ultimate Tensile Strength Mpa |
Elongation % |
|
255 |
640 |
45 |
Density: 8.42g/cm3
Magnetic Permeability: < 1.02
Specific Gravity: 8.42
